Why Download Kodak EasyShare using YepDownload? Kodak EasyShare Simple & Fast Download! Works with All Windows (64/32 bit) versions! Kodak EasyShare Latest Version! Fully compatible with Windows 10; Disclaimer Kodak EasyShare is a product developed by Kodak. This site is not directly affiliated with Kodak.

  1. Kodak Hero 5.1 Win 7 and Vista Driver; Kodak Hero 5.1 Win Xp Driver Download (9.59MB) Kodak Hero 5.1 Win Firmware Download (38.43KB) Compatibility: Windows 8/8.1 (32-bit/64-bit), Windows 7 (32-bit/64-bit), Windows Vista (32-bit/64-bit), Windows Xp. Kodak Hero 5.1 Cloud Printing Win Software Download (6.78MB) Compatibility: Mac OS X 10.8.x, Mac.
  2. How to Automatically Download and Update: Recommendation: Download DriverDoc Download DriverDoc - Product by Solvusoft, a driver update tool that is recommended for Windows users who are inexperienced in manually updating Kodak All-in-One Printer drivers. DriverDoc is a utility that automatically downloads and updates your OFFICE HERO 6.1 drivers, ensuring you are installing the.
  3. Any help on connecting a wireless Kodak printer to a Toshiba laptop with Windows 10. The laptop does not find it. Hi, Do you mean you could not find the printer when you.

Table of Contents > Networking Your Printer > Connecting to a wireless network

2 Networking Your Printer

To connect your printer to an 802.11b/g/n wireless (Wi-Fi) network, refer to the following information.

Before you connect

You need:

  • a wireless router.

  • to determine whether your wireless router supports Wi-Fi Protected Setup (WPS).

    NOTE:If you have specific questions about your router, see your router manufacturer's documentation for more information.

Connecting to a wireless network using the Wi-Fi Setup Wizard

You can use the Wi-Fi Setup Wizard on the printer to connect to your wireless network. Use the procedures that is appropriate for your network setup.

Connecting to a non-WPS wireless router

To connect your printer to your wireless network, you need to know the network name, also called the Service Set Identifier (SSID). You can obtain your network name from the wireless router. See the manufacturer's documentation for more information.

If you have enabled security on your network, you also need to know the security string (passphrase or password), which may be a Wired Equivalent Privacy (WEP) or a Wi-Fi Protected Access (WPA/WPA2) passphrase.

Record your network information using the correct uppercase and lowercase letters.

Network Name (SSID):

Security String (case-sensitive):

  1. Press Home.

  2. Press to select Network Settings, then press OK.

  3. With Wi-Fi Setup Wizard selected, press OK.

    NOTE:The Wi-Fi radio turns on when you select Wi-Fi Setup Wizard.

    The Wi-Fi connectivity LED blinks as the printer searches for available wireless networks within range, then displays the list in order of signal strength. For example:


    If there are additional networks than can be shown on the LCD, press to view them.

  4. Press to select your network name, then press OK.

    If you don't see your network in the list, or if you want to change your network, select Rescan for Wireless Networks, then press OK.

    NOTE: If the name of your network is not listed, make sure your wireless router is turned on and within range.

  5. If your network requires a password, use the LCD keyboard to enter your Security String. The Security String is case-sensitive.

    On the control panel, press , , or to select the letters and numbers. When you are finished, select DONE, then press OK.

  6. When the confirmation message appears, press OK.


    When the printer is successfully connected, the Wi-Fi connectivity LED will stop blinking and remains lit.

    The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakOFFICEHERO6.1+1002).

  7. If you haven't yet installed the KODAK All-in-One Printer Software, insert the CD that came with the printer into the computer CD drive, and follow the on-screen instructions. When the software checks for updates, if a newer version exists, install the newer version. (On a computer with MAC OS, be sure to select the option to check for newer versions.)

    NOTE: If you do not have the CD:

    1. Go to www.kodak.com/go/aiodownloads.

    2. In the results list, click the link for KODAK All-in-One Printer Software for your computer's operating system.

    3. Follow the on-screen instructions.

Connecting to a WPS wireless router

If your router supports Wi-Fi Protected Setup (WPS), use WPS Connect. Ericsson h5321gw driver windows 10 64 bit. WPS lets you configure your printer for a wireless network by pressing buttons or entering a PIN.

To connect to a network using WPS:

  1. Press Home.

  2. Press to select Network Settings, then press OK.

  3. With Wi-Fi Setup Wizard selected, press OK.

    NOTE:The Wi-Fi radio turns on automatically when you select Wi-Fi Setup Wizard.

  4. With WPS Connect selected, press OK.


  5. Select one of two methods of connecting:

    IMPORTANT:Before you press OK on the printer, make sure you know where the router's push button is, or where to enter the generated PIN. If necessary, consult your Internet Service Provider or router device manufacturer's documentation for more information.

    Using Push Button Configuration Entering WPS PIN
    NOTE:You will have two minutes to press or select the WPS button. It may be a button on the device or a virtual button in the device's software.

    1. With Push Button Configuration selected, press OK.

    2. Press or select the WPS button for your wireless router.

    1. Press to select Generate WPS PIN, then press OK.

    2. In your wireless router's software, locate the PIN screen, then follow the router's instructions.

    3. Enter the PIN you received on the LCD into the PIN screen.

  6. When the confirmation message appears, press OK.


    When the printer is successfully connected, the Wi-Fi connectivity LED stops blinking and remains lit.

    The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakOFFICEHERO6.1+1002).

  7. If you haven't yet installed the KODAK All-in-One Printer Software, insert the CD that came with the printer into the computer CD drive, and follow the on-screen instructions. When the software checks for updates, if a newer version exists, install the newer version. (On a computer with MAC OS, be sure to select the option to check for newer versions.)

    NOTE: If you do not have the CD:

    1. Go to www.kodak.com/go/aiodownloads.

    2. In the results list, click the link for KODAK All-in-One Printer Software for your computer's operating system.

    3. Follow the on-screen instructions.

Windows

Setting up an IP Address

IMPORTANT:You should only need to set up an IP Address for your printer if you are having a problem connecting your printer to a wireless network. Typically, it is not necessary to set up an IP Address. This procedure is for advanced users.

All IP Address entries have the following format: 000.000.000.000. If an address or Subnet Mask has only one or two characters between the periods, include one or two leading zeros in front of that number. For example:

The address as it may appear in your documentation

How to enter the address in the printer menu

149.89.138.149

149.089.138.149

149.2.40.149

149.002.040.149

To set up your IP Address on the printer:

  1. Press Home.

  2. Press to select Network Settings, then press OK.

  3. Press to select Advanced IP Address Setup, then press OK.

  4. Press OK again to continue.

  5. Select one of the following, then press OK:

    • Dynamic (DHCP)

    • Manual (Static)

  6. If you selected Manual (Static), you are prompted to enter an IP Address, a Subnet Mask, a Gateway Address, and a DNS Server address. Press OK after each entry. Use the navigation buttons to enter each digit of the numbers.

    Consult your Internet Service Provider or network administrator for more information.

Viewing the network configuration

To view the network configuration and verify that you are connected to your wireless network:

Office

  1. Press Home.

  2. Press to select Network Settings, then press OK.

  3. Press to select View Network Configuration, then press OK.

    The wireless or Ethernet network settings appear on the LCD, including:

    • Printer Name

    • Printer Hostname

    • Connection

    • Speed

    • IP Address

    • IP Address Type

    • Network Subnet

    • Connected Network SSID

    • Security

    • Authentication

    • Channel

    • Region

    • Radio (on/off)

    • MAC Address

    If the printer is connected to your network, you will see the network name and the word CONNECTED.

  4. To scroll through the information, press .

  5. When you are done, press OK.

Printing the network configuration

To print the current network configuration:

  1. Load plain paper into the printer. (See Loading plain paper.)

  2. Press Home.

  3. Press to select Network Settings, then press OK.

  4. Press to select Print Network Configuration, then press OK.

Installing your printer on additional computers on the network

To add your printer to another computer(s) on your network, install the KODAK All-in-One Printer Software on each computer.

  • Insert the CD that came with the printer into the computer CD drive, and follow the on-screen instructions. When the software checks for updates, if a newer version exists, install the newer version. (On a computer with MAC OS, be sure to select the option to check for newer versions.)

    NOTE: If you do not have the CD:

    1. Go to www.kodak.com/go/aiodownloads.

    2. In the results list, click the link for KODAK All-in-One Printer Software for your computer's operating system.

    3. Follow the on-screen instructions.

Connecting to another KODAK All-in-One Printer

If you are connecting to a newer model printer (for example, you have an ESP OFFICE 6150 Printer and now you are adding an OFFICE HERO 6.1 Printer), you must install the KODAK All-in-One Printer Software for the newer model.

NOTE:When you install the new software, the printer driver for the ESP OFFICE 6150 Printer will be uninstalled, and updates for the ESP OFFICE 6150 Printer will be installed in addition to the driver for the OFFICE HERO 6.1 Printer.

On a computer with WINDOWS OS:

  1. Select Start > All Programs > Kodak > KODAK Printer Setup Utility.

    • If your wireless printer (example: KodakOFFICEHERO6.1+1002) is not listed:

      1. Select No, my printer is not listed, then click Next.

      2. From the drop-down list, select your printer.

      3. Select Network - Wireless/Wi-Fi, then click Next. When your printer is detected, driver installation begins.

    • If your wireless all-in-one printer (example: KodakOFFICEHERO6.1+1002) is listed:

      1. Select the all-in-one printer that is connected to your network.

      2. Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins.

  2. When driver installation is complete, click Done.


On a computer with MAC OS:

  1. Select Apple > System Preferences.

  2. Under Hardware, select Print & Fax or Print & Scan.

  3. Click + in the dialog box.

  4. Select your printer from the list.

  5. Click Add, if required.


PreviousNext

Kodak Office Hero 6.1 Windows 10


Table of Contents > Networking Your Printer > Adding a wireless network connection to a USB-connected computer

2 Networking Your Printer

You can change the way you connect to your printer at any time.

Changing from USB to a wireless connection

To change the printer connection type from USB to a wireless (Wi-Fi) network:

If your printer is connected to a computer with WINDOWS OS:

  1. Disconnect the USB cable from your printer and computer.

  2. On your computer, disable any firewall you have installed until you have successfully completed the installation.

  3. If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network.

  4. Select Start > All Programs > Kodak > KODAK Printer Setup Utility.

    • If your wireless all-in-one printer (example: KodakOFFICEHERO6.1+1002) is not listed:

      1. Select No, my printer is not listed, then click Next.

      2. Select your printer from the list.

      3. Select Network - Wireless/Wi-Fi, then click Next. When your printer is detected, driver installation begins.

    • If your wireless all-in-one printer (example: KodakOFFICEHERO6.1+1002) is listed:

      1. Select the all-in-one printer that is connected to your network.

      2. Select Yes, my printer is listed, then click Next. When your printer is detected, driver installation begins.

  5. When driver installation is complete, click Done.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakOFFICEHERO6.1+1002).


Kodak Office Hero 6.1 Software

If your printer is connected to a computer with MAC OS:

  1. Disconnect the USB cable from your printer and computer.

  2. If you have not already done so, connect your printer to your wireless network. See Connecting to a wireless network.

  3. Select Apple > System Preferences.

  4. Under Hardware, select Print & Fax or Print & Scan.

  5. Click + in the dialog box.

  6. Select your printer from the list.

  7. Click Add, if required.

The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakOFFICEHERO6.1+1002).

Changing from USB to an Ethernet connection

Before you connect, you need:

  • an Ethernet network that includes a router, switch, or hub with an Ethernet port.

  • a Category 5 (or higher) Ethernet cable.

  • to temporarily disable your firewall until the printer is successfully installed and communicating.

To change from a USB connection to an Ethernet network connection:

  1. Disconnect the USB cable from your printer and computer.

  2. Connect the Ethernet cable to the Ethernet port on the back of the printer.


  3. Connect the other end of the Ethernet cable to an available Ethernet port on your router, switch, or hub.


If your printer is connected to a computer with WINDOWS OS:

  1. Select Start > All Programs > Kodak > KODAK Printer Setup Utility.

  2. Select No, my printer is not listed, then click Next.

  3. Select KODAK OFFICE HERO 6.1 AiO from the printer list.

  4. Select Network - Ethernet cable, then click Next.

    The Printer Setup Utility searches for your printer and connects automatically.

  5. Click Done.


If your printer is connected to a computer with MAC OS:

  1. Select Apple > System Preferences.

  2. Under Hardware, select Print & Fax or Print & Scan.

  3. Click + in the dialog box.

  4. Select your printer from the list.

  5. Click Add, if required.


HeroHeroPreviousHeroNext