ZXA10 F839 is GPON / XG-PON1 Cellular Backhaul Unit (CBU) type equipment for base station (Marco/Pico/Femto) backhaul. It uses a multi-service platform to support various services types. It is suitable for mobile communication base and wireless AP access capability. It can also support high-speed data service, time and clock frequency transmission and PoE/PoE+/PoE service for smallcell power. China Zte Gpon Olt Zxa10 C300 Netnumen N31 Network Management Software Nms, Find details about China Zte Olt Zxa10, Zte Gpon Olt from Zte Gpon Olt Zxa10 C300 Netnumen N31 Network Management Software Nms - Shenzhen Hua-Net Technology Co., Ltd. Management interface: CLI ( Telnet or RS232), SSH, SNMP V1/2/3, SNMP proxy ZXA10 C300 Up to 16. GPON, XG-PON1, P2P/GE, E1.

ZTE GPON OLT SNMP Server Configure

Today i will discuss how to ZTE GPON OLT SNMP Server Configure in ZXA10 C220 & C300 series OLT.

Prerequisites:

  • Make sure that the network device works normally.
  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

Context: SNMPis essentially a request-reply protocol running over UDP
(ports 161 and 162), though TCP operation is possible. SNMP is
an asymmetric protocol, operating between a management station and an agent. The agent is the device being managed – all its software has to do is implement a few simple packet types and a generic get-or-set function on its MIB variables. The management station presents the GUI by collecting MIB data over time.

The ZXA10 C220 supports SNMP v1/v2/v3.

To configure the SNMP server, perform the following steps:

Step-1: Use the configure terminal command to enter global configuration mode.

Step-2: Use the snmp-server community command to configure SNMP community.

Zte gpon snmp management ikarus

Step-3: Use the snmp-server location command to configure physical location information.

Zte Gpon Snmp Management Software

Step-4: Use the snmp-server enable command to configure trap type.

Snmp management software

Note: Trap is the unsolicited information which is sent to the NMS by a managed device . It is used to report urgent events. The ZXA10 C220 supports six types of traps: SNMP, BGP, OSPF, RMON, STALARM, and VPN.

Step-5: Use the snmp-server host command to configure SNMP server (trap destination host).

Ulysses for mac torrent. Step-6: Use the show snmp config command to query SNMP configuration.

ZTE GPON OLT SNMP Server Configure Example:

Configure SNMP server:

  • Community: Public
  • Right: Read only
  • SNMP server host: 10.62.31.123
  • SNMP version: v2

ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#snmp-server community public view allview ro
ZXAN(config)#snmp-server enable trap
ZXAN(config)#snmp-server host 10.62.31.123 trap version 2c pulic enable NOTIFICATIONS server-index 1

Zte Gpon Snmp Management Software

ZXAN(config)#show snmp config
snmp-server location xxxx, yyy, Bangaldesh.
snmp-server contact +88-017-xxxxxxxx
snmp-server packetSize 3000
snmp-server engine-id 830900020300010289d64401
snmp-server community public view allview rw
snmp-server view allview internet included
snmp-server view DefaultView system included
snmp-server host 10.62.31.123 trap version 2c pulic enable NOTIFICATIONS server-index 1 udp-port 162
snmp-server enable trap SNMP
snmp-server enable trap VPN
snmp-server enable trap BGP
snmp-server enable trap OSPF
snmp-server enable trap RMON
snmp-server enable trap STALAR